Description
Regeneration Brake System
During deceleration or braking of an electric vehicle or HEV,
the drive motor acts as an alternator and charges the battery by
converting the vehicle’ ...
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the brake fluid level switch connector (A), and remove the reservoir cap.
...
Replacement
1.
Remove the tail gate weatherstrip (A).
•
Do not apply sealant to the body.
2.
Install in the reverse order of removal.
•
Install the weatherstrip aligned with center line (B).
...
Description
Mode of Operation
ASIC Mode
1.
Factory Mode
The factory mode is the mode that allows the TPM sensor to
transmit RF Frames and sample LF more often in the HKMC factory. The TPM
sensor will send normal RF frames in factory mode.
LF sampling will occur every 1 second, to ensu ...