Kia Soul EV: AHB(Active Hydraulic Boost) System / Pressure Source Unit Components and Components Location

Kia Soul EV (PS EV) 2015-2020 Service Manual / Brake System / AHB(Active Hydraulic Boost) System / Pressure Source Unit Components and Components Location

Components

   
PSU must not be disassembled.
1. Motor connector
2. Bracket
3. Block
4. Accumulator
5. Damper
6. Motor





Brake Actuation Unit Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the brake fluid level switch connector (A), and remove the reservoir cap.   ...

Pressure Source Unit Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the brake fluid level switch connector (A), and remove the reservoir cap.   ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Side Sill Moulding Repair procedures


Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • Ta ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: High Voltage Battery Heater Temperature Sensor Specifications


Specification Temperature (°C)Resistance (k?)Tolerance (%)-40204.5±4.0-30117.8±3.5- 2070.34±3.0- 1043.43±2.5027.63±2.01018.07±1.62012.11±1.2308.303±1.2405.813±1.5504.149±1.9603.013±2.2702.225±2.5 ...

Copyright © www.ksoulev.com 2020-2021