Kia Soul EV: AHB(Active Hydraulic Boost) System / Brake Pedal Components and Components Location

Brake Line Repair procedures

Removal 1. Disconnect the brake fiuid level switch connector, and remove the reservoir cap. 2. Remove the brake fluid from the master cylinder reservior with a syringe.   &nb ...

Brake Pedal Repair procedures

Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel and reinforcing panel. (Refer to the Body group - crash pad) 3. ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: High voltage joint box Components and Components Location

Components Location 1. High voltage joint box2. Air conditioning compressor high voltage connector3. Electric power control unit (EPCU) high voltage cable4. On-board charger (OBC) high voltage cable connector5. PTC heater high voltage cable6. High voltage battery assembly high voltage cable7. H ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Auto Light Sensor Repair procedures

Inspection In the state of IGN1 ON, when the multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor''s input. During IGN1 ON, the BCM monitors the range of this supply and alerts the f ...