Other information:
Replacement
1.
Remove the front door module.
(Refer to Front Door - "Front Door Module")
2.
Remove the front door outside handle base (A) by pushing in the lock pins located in the back.
3.
Remove the front door outside handle connector wiring harness (A).
4.
Remove the front door ...
Inspection
C-CAN Terminating Resistance Inspection (Multi Purpose Check Connector)
1.
Turn the ignition OFF.
2.
Measure the resistance between pins No. 20 and No. 17 of multi purpose check connector (20 pins).
Measure the resistance between pins No. 3 and No. 11 of DLC (16 pins).
Spec ...