Other information:
Inspection
Check that the brake pedal operates smoothly.
Brake Pedal Height and Stop Lamp Switch clearance Adjustment
1.
Disconnect the stop lamp switch connector (A).
2.
Adjust the brake pedal height (A) as illustration below.
Pedal height (A): 174.2 mm (6.86 in)
Full stroke (C): 108 ...
Inspection
High voltage battery heater temperature sensor is installed in modules No. 1 and No. 8.
1.
Turn the ignition switch OFF.
2.
Shut off the high voltage.
(Refer to Battery Control System - "High Voltage Shut-off Procedure")
3.
Remove the high volt ...