Kia Soul EV: ESP(Electronic Stability Program) System / Front Wheel Speed Sensor Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Brake System / ESP(Electronic Stability Program) System / Front Wheel Speed Sensor Repair procedures

Removal

Remove the front wheel & tire.

Tightening torque:

88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

Remove the front wheel speed sensor mounting bolt (A).

Tightening torque:

6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

3.	Disconnect the front wheel speed sensor connector (A).

Loosen the mounting bolt (A) and then remove the front wheel speed sensor.

Tightening torque :

8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

5.	Install in the reverse order of removal.

Front Wheel Speed Sensor Components and Components Location

Components 1. Front wheel speed sensor2. Front wheel speed sensor connector ...

Rear Wheel Speed Sensor Components and Components Location

Components 1. Rear wheel speed sensor 2. Extension cable assembly ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: A Pillar Garnish Repair procedures

Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • Ta ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Rear Combination Lamp Repair procedures

Removal Rear Combination Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the rear combination lamp (A) after loosening the mounting screws. 3. Disconnect the rear combination lamp connector (A). Turn Signal Lamp Bulb 1. Disconnect the negative (-) battery terminal. ...