Other information:
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the intake actuator connector.
3.
Verify that the actuator operates to the recirculation position when 12V is connected to terminal 3 and ground to terminal 7.
Verify that the intake actuator operates to the recirculated air posi ...
Component Location Index
Engine Room
[Without Heat Pump]
1. Receiver-drier2. Condensor3. A/C Pressure Transducer (APT)4. Service port (Low pressure)5. Service port (High pressure)6. Suction & Liquid tube7. Expansion valve8. Suction pipe9. Suction hose10. Electric A/C compressor
[ ...