Other information:
Removal
Main Relay, Pre Charge Relay, Pre Charge Resistor, Battery
Current Sensor, High Voltage Battery Heater Relay and the High Voltage
Battery Heater Fuse are integrated in the Power Relay Assembly (PRA). So
Refer to the removal procedure of Power Relay Assem ...
Inspection
Check the functions of the ECM in the following procedures:
1.
Turn the ignition key to the "ON" position.
2.
Cover the forward facing sensor.
3.
Flash a light onto the rearward looking sensor.
4.
The ECM should be darkened immediately on detecting light from the rearward ...