Kia Soul EV: High Voltage Battery Control System / Pre-Charge Registor Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / EV Battery System / High Voltage Battery Control System / Pre-Charge Registor Repair procedures

Removal

Main Relay, Pre Charge Relay, Pre Charge Resistor, Battery Current Sensor, High Voltage Battery Heater Relay and the High Voltage Battery Heater Fuse are integrated in the Power Relay Assembly (PRA). So Refer to the removal procedure of Power Relay Assembly (PRA).

Installation

Pre-Charge Registor Schematic Diagrams

System Circuit Diagram With High Votlage Battery Heater System Without High Voltage Battery Heater System Circuit Diagram Without High Voltage Battery Heater System With High Voltage Batt ...

Battery Current Sensor Specifications

Specifications Current (A)Ouput Voltage (V)-400(Charge)0.5-200 (Charge)1.502.5200 (Discharge)3.5+400 (Discharge)4.5 ItemSpecificationsRemarkCurrent Sensor Output Voltage (V)Approx. 2.5 ± ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Seat Heater Switch Repair procedures

Removal First Row Seat 1. Remove the heater & A/C control unit. (Refer to Heating, Ventilation And Air Conditioning - "Heater & A/C Control Unit (FATC)") Second Row Seat 1. Disconnect the negative (-) battery terminal. 2. Remove the rear door trim. (Refer to Body - "Rear Door ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Passenger Airbag (PAB) Module Description and Operation

Description Passenger Airbag (PAB) module is located in the passenger crash pad. The PAB contains 2 firing squibs of airbag and 1 firing squib of active vent. The deployment timing of both 2 firing squibs of airbag and 1 firing squib of active vent depends on the crash speed or the level ...