Other information:
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad lower panel and reinforcing panel. (Refer to the Body group - crash pad)
3.
Remove the lower duct (A).
4.
Pull down steering column shaft after removing bolts and nuts. (Re ...
Inspection
Fog Lamp Switch
1.
With the fog lamp switch in each position, make sure that
continuity exists between the following terminals. If continuity is not
as specified, replace the multifunction switch.
Removal
Front Fog Lamp
1.
Disconnect the negative (-) battery terminal.
2. ...