Kia Soul EV: Rear Door / Rear Door Outside Handle Repair procedures
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
Remove the hole plug (A).
3.
After loosening the mounting bolt, remove the rear door outside handle cover (B).
Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
4.
Remove the rear door outside handle (A) by sliding it backward.
5.
Install in the reverse order of removal.
•
Be sure to install the outside handle pad (A) between the outside handle and the door panel.
•
Make sure that the door locks/unlocks and opens/closes properly.
Component Location
1. Rear door outside handle
...
Component Location
1. Rear door latch
...
Other information:
Components Location
1. 3-Way Solenoid Valve Assembly2. 2-Way Solenoid Valve Assembly
...
Description
High Voltage Battery Heater Relay is installed in the Power Relay Assembly (PRA).
It supplies high voltage flow inside the heater to operate the heater to warm the high voltage battery.
Control FlowOperation
...