Other information:
Replacement
1.
Remove the hole plug (A).
2.
After loosening the mounting bolt, remove the front door outside handle cover (B).
Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
3.
Remove the front door outside handle (A) by sliding it backward.
4.
Disconnect ...
Replacement
1.
Remove the rear door module.
(Refer to Rear Door - "Rear Door Module")
2.
Remove the rear door outside handle base (A) by pushing in the lock pins located in the back.
3.
Remove the rear door outside handle cable (A).
4.
Disconnect the rear door latch connector (A).
...