Other information:
Inspection
1.
Remove the overhead console lamp assembly then check for
continuity between terminals. If the continuity is not as specified,
replace the map lamp switch.
No.Description1Ground (-)2Door (-)3Room/ Door (-)4Battery (+)
Removal
1.
Disconnect the negative (-) battery term ...
Removal
1.
Loosen the windshield wiper arm nut (B) after removing the wiper cap (A).
2.
Remove the windshield wiper arm and blade.
3.
If necessary, release the wiper blade fixing clip by pulling up and remove the wiper blade from the inside radius of wiper arm.
4.
Disconnect the wash ...