Other information:
Inspection
C-CAN Terminating Resistance Inspection (Multi Purpose Check Connector)
1.
Turn the ignition OFF.
2.
Measure the resistance between pins No. 20 and No. 17 of multi purpose check connector (20 pins).
Measure the resistance between pins No. 3 and No. 11 of DLC (16 pins).
Spec ...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the gear knob (A) from the console upper cover after pulling it out upward.
3.
Using a screw driver or remover, remove the console upper cover (A).
4.
Disconnect the indicator connector (A) and start/stop switch conne ...