Other information:
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door quadrant cover (A).
3.
Disconnect the power door mirror connector (A) from the harness.
4.
Apply battery voltage to each terminal as shown in the table and verify that the mirror operates properly.
...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Using the flat screw driver or remover, remove the crash pad center air vent panel (A).
3.
Disconnect the hazard switch connector (A).
4.
Remove center fascia upper panel (A) after loosening the mounting screws.
5.
Disco ...