Other information:
Inspection
In the state of IGN1 ON, when the multi function switch
module detects auto light switch on, tail lamp relay output and head
lamp low relay output are controlled according to auto light sensor''s
input.
During IGN1 ON, the BCM monitors the range of this supply and
alerts the f ...
Inspection
1.
Remove the overhead console lamp assembly then check for
continuity between terminals. If the continuity is not as specified,
replace the map lamp switch.
No.Description1Ground (-)2Door (-)3Room/ Door (-)4Battery (+)
Removal
1.
Disconnect the negative (-) battery term ...