Kia Soul EV: Steering wheel / Heated Steering wheel Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Steering System / Steering wheel / Heated Steering wheel Repair procedures

Inspection
1.
Measure a resistance of NTC and Heated pad.
NTC resistance(Yellow / Black) - 10k? (9k? ~ 11k?), 25°C
Heated pad resistance (Yellow , Black) - 1.73? ( 2.1 ~ 2.5 ? )
2.
Measure a temperature.
The temperature of wheel surface grip must rise from -20°C to 20°C within 6 minute
The temperature of wheel surface grip must keep 38°C ± 4°C after 25 minute
Temperature measurement points (1~8)

Heated Steering wheel Schematic Diagrams
System Circuit Diagram ...

Flex Steer Components and Components Location
Components Location 1. Flex steering swithch ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Inspection


Inspection     When removing the battery pack assembly to inspect the battery system, it can be connected to vehicle by using the SST 0K918-E4100, 0K375-E4100, 0K375-E4200. Before installing the battery system assembly, check if the battery is OK by using the SST. ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: High Voltage Battery Heater Fuse Repair procedures


Removal     Main Relay, Pre Charge Relay, Pre Charge Resistor, Battery Current Sensor, High Voltage Battery Heater Relay and the High Voltage Battery Heater Fuse are integrated in the Power Relay Assembly (PRA). So Refer to the removal procedure of Power Relay Assem ...

Copyright © www.ksoulev.com 2020-2024