Replacement
1.
Disconnect the battery negative cable from the battery and then wait for at least 30 seconds.
2.
Turn the steering wheel so that the front wheels can face straight ahead.
3.
...
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Loosen the bolt and then disconnect the universal joint assembly (A) from the pin ...
Removal
1.
Turn ignition OFF and disconnect the negative (-) battery cable.
2.
Remove the floor console upper cover.
(Refer to Body group - "Console")
3.
Remove the EPB switch assembly.
Installation
1.
Install the EPB switch assembly to the floor console upper cover.
2.
...