Other information:
Replacement
1.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
2.
Remove the front door belt inside weatherstrip (A).
3.
Install in the reverse order of removal.
•
Replace any damaged clips.
...
Inspection
1.
Turn the ignition switch OFF and disconnect the auxiliary battery (12V) negative (-) terminal.
2.
Connect the GDS to DLC.
3.
Turn the ignition switch ON.
4.
Inspect "Control Duty" and waveforms according to "Fan Status" by performing "Actuation Test" on GDS.
Cooling ...