Other information:
Inspection
1.
Check that the red light flickers when the door lock or unlock button is pressed on the transmitter.
2.
Remove the battery (A) and check voltage if the red light doesn''t flicker.
Standard voltage : 3V
3.
Insert the battery (A) into the tester (09954-2P100).
4.
Pus ...
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the brake fluid level switch connector (A), and remove the reservoir cap.
Be sure to completely remove foreign substances around brake
fluid reservoir and cap be ...