Inspection
When removing the battery pack assembly to inspect the
battery system, it can be connected to vehicle by using the SST
0K918-E4100, 0K375-E4100, 0K375-E4 ...
Removal
•
Removal of the airbag must be performed according to the precautions / procedures described previously.
•
Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s).
•
Do not turn the ig ...
Description
The A/C Pressure Transducer (APT) converts the pressure value
of high pressure line into voltage value after measuring it. Engine ECU
converts the voltage value to control the cooling fan by operating it
in high speed or low speed. Engine ECU stops the operation of the
compres ...