Replacement
1.
Remove the front bumper.
(Refer to Front Bumper - "Front Bumper Cover")
2.
Loosen the screws, and then remove the charge door open cover lamp (A).
3.
Disconnect the notific ...
Adjustment
1.
After loosening the hinge (A) mounting bolt, adjust the hood (B) clearance by moving it up and down, or left and right.
2.
Adjust the hood height by turning the hood overslam bum ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the temperature control actuator connector.
3.
Verify that the temperature control actuator operates to the
cool position when 12V is connected to terminal 3 and ground to terminal
7.
Verify that the temperature control actua ...