Replacement
1.
Remove the glue on both ends (A) of the hood weatherstrip (B).
•
Be careful not to scratch the hood weatherstrip.
2.
Install in the r ...
Replacement
1.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
2.
Loosen the front door inside handle mounting screws (A).
3.
Using a flat-tip screwdriver (B), pull up the front door inside handle lock pin (C).
4.
Remove the front door inside handle (A).
5. ...
Inspection
1.
Check the tire pressure.
(230+7 kPa (33psi+1.0psi)
2.
Check the tire tread wear.
(Refer to Suspension System - "Tire")
3.
Check if the wear of tire tread is uneven.
(Refer to Suspension System - "Alignment") ...