Other information:
Inspection
Normal Charge Port Relay
Check for continuity between the terminals.
1.
There should be continuity between terminals No.20 and No.10
when power and ground are connected to terminals No.10 and No.9 in the
ICM-A.
Folding Motor Relay
Check for continuity between the terminals.
...
Inspection
Rear Wiper Motor
1.
Remove the connector from the rear wiper motor.
2.
Connect battery positive (+) and negative (-) cables to terminals 2 and 1 respectively.
3.
Check that the motor operates normally. Replace the motor if it operates abnormally.
No.Description1Battery (+) ...