Other information:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front/rear bumper cover.
(Refer to Body - "Front Bumper Cover")
(Refer to Body - "Rear Bumper Cover")
3.
Disconnect the connector (A) from the ultrasonic sensor.
[Front sensor, Rear center sensor]
[Rear side senso ...
Removal
•
Removal of the airbag must be performed according to the precautions / procedures described previously.
•
Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s).
•
Do not turn the ig ...