Replacement
1.
Remove the cap (A), the nuts and the wiper arm (B).
Tightening torque :
22.6 ~ 26.5 N.m(2.3 ~ 2.7 kgf.m, 16.6 ~ 19.5 lb-ft)
2.
Remove the glue from both ends (A) of the ho ...
Other information:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the floor console upper cover.
(Refer to Body - "Floor Console Assembly")
3.
Remove the multimedia jack (A).
Installation
1.
Install the multimedia jack.
2.
Install the floor console upper cover.
3.
Connect ...
Description
Installed in the high voltage battery module, Battery
Temperature Sensor transfers temperature of each battery module to BMS
ECU. ...