Kia Soul EV: Crash Pad / Cluster Fascia Panel Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Crash Pad / Cluster Fascia Panel Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Lower the steering wheel.
2.
Using a screwdriver or remover, remove the cluster fascia panel (A).

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
Cluster Fascia Panel Components and Components Location
Component Location 1. Cluster fascia panel ...

Center Fascia Panel Components and Components Location
Component Location 1. Center fascia panel ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Cowl Cross Bar Assembly Components and Components Location


Component Location 1. Cowl cross bar assembly ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Rear Torsion Beam Axle Repair procedures


Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub. Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)     • Be carefu ...

Copyright © www.ksoulev.com 2020-2025