Other information:
Schematic Diagrams
Input Connector (AC)
TerminalDescriptionSpecificationCurrent (normal)Voltage (maximum)1Phase voltage (L1)_220VAC33A310VAC2Ground3Phase voltage (L2)_220VAC
Output Connector (DC)
TerminalDescriptionSpecificationCurrent (normal)Voltage (maximum)1High Voltage Battery (-)25 ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the negative (-) battery terminal.
3.
Verify that the auto defogging actuator operates to the open
position when 12V is connected to terminal 3 and ground to terminal 4.
Verify that the auto defogging actuator operates to the c ...