Other information:
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad lower panel and reinforcing panel. (Refer to the Body group - crash pad)
3.
Remove the lower duct (A).
4.
Pull down steering column shaft after removing bolts and nuts. (Re ...
Description
Quick Charge Relay Assembly (QRA) is installed in the high
voltage joint box and it consists of main relays which control the high
voltage. The QRA controls the high voltage between the high voltage
battery pack and the high voltage joint box by BMS control signal. If
the QRA ...