Kia Soul EV: Crash Pad / Steering Column Shroud Panel Repair procedures
[Steering column shroud lower panel]
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Remove the crash pad lower panel.
(Refer to Crash Pad - "Crash Pad Lower Panel")
2.
After loosening the mounting screws, remove the steering column shroud lower panel (A) using a screw driver.
3.
Install in the reverse order of removal.
•
Replace any damaged clips.
[Steering column shroud upper panel]
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Remove the cluster fascia panel.
(Refer to Crash Pad - "Cluster Fascia Panel")
2.
Install in the reverse order of removal.
•
Replace any damaged clips.
Component Location
1. Steering column shroud lower panel2. Steering column shroud upper panel
...
Component Location
[LH]
1. Crash pad side cover [LH]
[RH]
1. Crash pad side cover [RH]
...
Other information:
Description
The primary purpose of the SRSCM (Supplemental Restraints
System Control Module) is to determine an event that warrants restraint
system air bag deployment. The SRSCM must decide whether to deploy the
restraint system or not. After determining that pretensioners and/or
airbag ...
System Circuit Diagram
Connector Location
BMS ECU Connector And Terminal Function
BMS ECU Terminal Function
A Connector [B01-A] (35 Pin) - Voltage Measurement Connector
Pin no.DescriptionConnected to1Battery Cell [Module 8/Cell 13] Voltage InputBattery Cell [Module 8/Cell 13]2Battery Cell ...