Other information:
Replacement
1.
Remove the glue on both ends (A) of the hood weatherstrip (B).
•
Be careful not to scratch the hood weatherstrip.
2.
Install in the reverse order of removal. ...
Removal
1.
Turn ignition OFF and disconnect the negative (-) battery cable.
2.
Remove the floor console assembly.(Refer to Body - “Floor console assembly")
3.
Disconnect the EPB control unit mounting nuts and then remove EPB control unit.
Tighten torque:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 ...