Other information:
Replacement
1.
Remove the hole plug (A).
2.
After loosening the mounting bolt, remove the front door outside handle cover (B).
Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
3.
Remove the front door outside handle (A) by sliding it backward.
4.
Disconnect ...
Component Location
1. Heater unit
Components
[LH]
1. Floor shower duct assembly [LH]2. Duct sensor3. Interior condenser cover4. Heater core cover5. Temp door arm6. Temp door lever7. Temp actuator motor assembly8. Floor door lever9. Mode actuator motor assembly [LH]10. Mode cam11. Motor ...