Other information:
Fuse Inspection
1.
Be sure that there are no loose fuse holders and that the fuses are held securely.
2.
Is the fuse capacity correct for each circuit?
3.
Are there any blown fuses?
If a fuse is to be replaced, be sure to use a new fuse of the
same capacity. At all times, determine th ...
Removal
1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Remove the rear wheel speed sensor.
(Refer to Driveshaft and axle - "Rear Hub - Carrier")
3.
Install in the reverse order of removal. ...