Other information:
   Removal
1.
 Turn ignition switch OFF and disconnect the negative (-) battery cable. 
2.
 Remove the crash pad lower panel and reinforcing panel. (Refer to the Body group - crash pad) 
3.
 Remove the lower duct (A).
4.
Pull down steering column shaft after removing bolts and nuts. (Re ...
   
   Replacement
1.
Remove the tail gate weatherstrip (A).
								   
 •
 
Do not apply sealant to the body. 
2.
Install in the reverse order of removal.
								   
 •
 
Install the weatherstrip aligned with center line (B). 
 ...