Other information:
Removal
1.
Turn ignition OFF and disconnect the negative (-) battery cable.
2.
Remove the floor console upper cover.
(Refer to Body group - "Console")
3.
Remove the EPB switch assembly.
Installation
1.
Install the EPB switch assembly to the floor console upper cover.
2.
...
Inspection
Front Power Window Motor
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
3.
Disconnect the connector (A) from the motor.
(A : Safety, B : Standard)
4.
Connect the motor terminals directly to battery vol ...