Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) from front hub.
Tightening torque:
88.3 ~ ...
Operation Condition
1.
The power supplied to the PTC heater should be within DC 240V - 420V (high voltage).
2.
The power supplied to the PTC heater should be within 9.0V - 16.0V (low voltage).
3.
The interlcok and insulation resistance must be normal.
4.
The engine must be running.
...