Other information:
Inspection
Front Door Lock Module Inspection
1.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
2.
Remove the front door module.
(Refer to Body - "Front Door Module")
3.
Disconnect the connectors from the actuator.
4.
Check actuator operation by connecting power an ...
Inspection
1.
Check the tire pressure.
(230+7 kPa (33psi+1.0psi)
2.
Check the tire tread wear.
(Refer to Suspension System - "Tire")
3.
Check if the wear of tire tread is uneven.
(Refer to Suspension System - "Alignment") ...