Inspection
1.
Check the suspension ball joint.
Check the grease leaks, kinks or damage in the front lower arm ball joint.
2.
Check the grease leaks, kinks or damage in the tie rod end ball jo ...
Replacement
[LH]
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
†...
Inspection
Fog Lamp Switch
1.
With the fog lamp switch in each position, make sure that
continuity exists between the following terminals. If continuity is not
as specified, replace the multifunction switch.
Removal
Front Fog Lamp
1.
Disconnect the negative (-) battery terminal.
2. ...