Other information:
Warning Lamp Activation
Warning Lamp Behavior after Ignition On
As soon as the operating voltage is applied to the SRSCM ignition input, the SRSCM activates the warning lamp for a lamp check.
The lamp will turn on for 6 seconds during the initialization phase and will then turn off afterward. ...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the cluster fascia panel.
(Refer to Body - "Cluster Fascia Panel")
3.
Remove the cluster (A) after removing screws.
4.
Disconnect the cluster connector (A) from the cluster.
Installation
1.
Connect the cluster ...