Kia Soul EV: Chassis / Brake Lines, Hoses and Connections Repair procedures
Visually check for proper installation, chafing, cracks, deterioration and any leakage
Replace any deteriorated or damaged parts immediately.
Inspection
1.
Check the brake fluid level.
Take care as brake fluid can harm your hands and eyes and
damage painted surfaces. If fluid gets on your hands or in your ...
Inspection
Check that the brake pedal operates smoothly.
Brake Pedal Height and Stop Lamp Switch clearance Adjustment
1.
Disconnect the stop lamp switch connector (A).
2.
Adjust the brake pe ...
Other information:
High Voltage Shut-off Procedure
Be sure to read and follow the “General Safety Information
and Caution” before doing any work related with the high voltage
system. Failure to follow the safety instructions may result in serious
electrical injuries.
...
Inspection
1.
Turn the ignition switch ON.
2.
Connect the GDS.
3.
Emit intensive light toward the photo sensor using a lamp, and check the output voltage change.
4.
The voltage will rise with higher intensive light and reduce with lower intensive light.
1. Auto Light Signal2. Auto ...