Kia Soul EV: High Voltage Battery Control System / Battery Current Sensor Description and Operation

Kia Soul EV (PS EV) 2015-2020 Service Manual / EV Battery System / High Voltage Battery Control System / Battery Current Sensor Description and Operation

Description
Battery Current Sensor is installed in the Power Relay Assembly and it measures the current when the high voltage battery is being charged or discharged.
[With High Voltage Battery Heater System]

1. Main Relay (+)
2. Main Relay (-)
3. Pre Charge Relay
4. Pre Charge Resistor
5. Battery Current Sensor
6. High Voltage Battery Heater Relay
7. High Voltage Battery Heater Fuse

[Without High Voltage Battery Heater System]

1. Main Relay (+)
2. Main Relay (-)
3. Pre Charge Relay
4. Pre Charge Resistor
5. Battery Current Sensor


Battery Current Sensor Specifications
Specifications Current (A)Ouput Voltage (V)-400(Charge)0.5-200 (Charge)1.502.5200 (Discharge)3.5+400 (Discharge)4.5 ItemSpecificationsRemarkCurrent Sensor Output Voltage (V)Approx. 2.5 ± ...

Battery Current Sensor Schematic Diagrams
Systerm Circuit Diagram With High Voltage Battery Heater System Without High Voltage Battery Heater System Circuit Diagram Without High Voltage Battery Heater System With High Voltage Bat ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Description and Operation


System Configuration PAS consists of 8 sensors (4 front & 4 rear) which detect the obstacles and transmit the result in 3 separate warning levels, the first, second and third to IPM (BCM) via Lin communication. IPM (BCM) determines the level of alarm based on the transmitted communicati ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Hood Latch Release Handle Repair procedures


Replacement 1. Using a screwdriver or remover, remove the hood release handle (A).     • Use a 6mm hex bit to press the center until the handle easily pulls off the post. 2. Install in the reverse order of removal.     • ...

Copyright © www.ksoulev.com 2020-2024