Kia Soul EV: High Voltage Battery Control System / Battery Current Sensor Specifications

Kia Soul EV (PS EV) 2015-2020 Service Manual / EV Battery System / High Voltage Battery Control System / Battery Current Sensor Specifications

Specifications
Current (A)
Ouput Voltage (V)
-400(Charge)
0.5
-200 (Charge)
1.5
0
2.5
200 (Discharge)
3.5
+400 (Discharge)
4.5

Item
Specifications
Remark
Current Sensor Output Voltage (V)
Approx. 2.5 ± 0.1
Checkable by multi tester
Current Sensor Power Voltage (V)
Approx. 5 ± 0.1
Checkable by multi tester

Pre-Charge Registor Repair procedures
Removal     Main Relay, Pre Charge Relay, Pre Charge Resistor, Battery Current Sensor, High Voltage Battery Heater Relay and the High Voltage Battery Heater Fuse are in ...

Battery Current Sensor Description and Operation
Description Battery Current Sensor is installed in the Power Relay Assembly and it measures the current when the high voltage battery is being charged or discharged. [With High Voltage Batte ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Instrument Cluster Repair procedures


Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the cluster fascia panel. (Refer to Body - "Cluster Fascia Panel") 3. Remove the cluster (A) after removing screws. 4. Disconnect the cluster connector (A) from the cluster. Installation 1. Connect the cluster ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Front Strut Assembly Repair procedures


Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     • Be ca ...

Copyright © www.ksoulev.com 2020-2022