Other information:
Replacement
When the receiver first arrives for replacement:
a.
It will be in Virgin State.
b.
It will not be configured for any specific platform.
c.
It will not have any sensor ID''s memorized.
It is important to make sure ...
Removal
1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Remove the rear wheel speed sensor.
(Refer to Driveshaft and axle - "Rear Hub - Carrier")
3.
Install in the reverse order of removal. ...