Kia Soul EV: Body Side Moulding / Side Sill Moulding Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Body Side Moulding / Side Sill Moulding Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Loosen the side sill moulding mounting screws.
2.
Using a screwdriver or remover, remove the side sill moulding (A).

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
Rear Wheel Guard Repair procedures
Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protec ...

Cowl Top Cover
...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Charge Port Repair procedures


Removal     • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow the safety instructions may result in serious electrical injuries. • Be sure ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Normal Charge Cable Lock Actuator Repair procedures


Removal and Installation 1. Shut off the high voltage. (Refer to Battery Control System – “High Voltage Shut-off Procedure”) 2. Disconnect the auxiliary battery (12V) negative (-) terminal. 3. Disconnect the connector (A). 4. Remove the actuator by loosening the bolts (B). ...

Copyright © www.ksoulev.com 2020-2022