Kia Soul EV: Body Side Moulding / Rear Wheel Guard Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Body Side Moulding / Rear Wheel Guard Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Remove the rear tire.
2.
After loosening the mounting clips and screws, remove the front wheel guard (A).

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
Front Wheel Guard Repair procedures
Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protec ...

Side Sill Moulding Repair procedures
Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protec ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Power Door Mirror Actuator Repair procedures


Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door quadrant cover (A). 3. Disconnect the power door mirror connector (A) from the harness. 4. Apply battery voltage to each terminal as shown in the table and verify that the mirror operates properly. ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Safety Plug Repair procedures


Inspection     • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow the safety instructions may result in serious electrical injuries. • Be su ...

Copyright © www.ksoulev.com 2020-2023