Kia Soul EV: Body Side Moulding / Front Wheel Guard Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Body Side Moulding / Front Wheel Guard Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Remove the front tire.
2.
After loosening the mounting clips and screws, remove the front wheel guard (A).

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
A Pillar Garnish Repair procedures
Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protec ...

Rear Wheel Guard Repair procedures
Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protec ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Electric Parking Brake (EPB) Repair procedures


Removal 1. Turn ignition OFF and disconnect the negative (-) battery cable. 2. Remove the floor console assembly.(Refer to Body - “Floor console assembly") 3. Disconnect the EPB control unit mounting nuts and then remove EPB control unit. Tighten torque: 3.9 ~ 5.9 N.m (0.4 ~ 0.6 ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: ON-Board Charger (OBC) Schematic Diagrams


Schematic Diagrams Input Connector (AC) TerminalDescriptionSpecificationCurrent (normal)Voltage (maximum)1Phase voltage (L1)_220VAC33A310VAC2Ground3Phase voltage (L2)_220VAC Output Connector (DC) TerminalDescriptionSpecificationCurrent (normal)Voltage (maximum)1High Voltage Battery (-)25 ...

Copyright © www.ksoulev.com 2020-2024