Other information:
System Circuit Diagram
Connector Location
BMS ECU Connector And Terminal Function
BMS ECU Terminal Function
A Connector [B01-A] (35 Pin) - Voltage Measurement Connector
Pin no.DescriptionConnected to1Battery Cell [Module 8/Cell 13] Voltage InputBattery Cell [Module 8/Cell 13]2Battery Cell ...
Removal
1.
Turn ignition OFF and disconnect the negative (-) battery cable.
2.
Remove the floor console assembly.(Refer to Body - “Floor console assembly")
3.
Disconnect the EPB control unit mounting nuts and then remove EPB control unit.
Tighten torque:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 ...