Kia Soul EV: Tail Gate / Tail Gate Trim Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Tail Gate / Tail Gate Trim Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

1.	After loosening the mounting screws, remove the tail gate trim (A).

Install in the reverse order of removal.

•	Replace any damaged clips.

Tail Gate Trim Components and Components Location

Component Location 1. Tail gate trim ...

Tail Gate Latch Components and Components Location

Component Location 1. Tail gate latch assembly ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Receiver-Drier Repair procedures

Replacement [Without Heat Pump] 1. Remove the condenser, and then use an L wrench to remove the bottom cap (B) from the condenser. Tightening torque : 9.8 ~ 14.9 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft) 2. Remove the desiccant (A) from the condenser using a long nose plier. Che ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Hood Weatherstrip Repair procedures

Replacement 1. Remove the glue on both ends (A) of the hood weatherstrip (B). • Be careful not to scratch the hood weatherstrip. 2. Install in the reverse order of removal. ...