Kia Soul EV: High Voltage Battery Control System / High Voltage Battery Heater Relay Specifications

Kia Soul EV (PS EV) 2015-2020 Service Manual / EV Battery System / High Voltage Battery Control System / High Voltage Battery Heater Relay Specifications

Specification
Item
Specification
ON
Rated Voltage (V)
450
Rated Current (A)
10
Voltage Drop (V)
Less than 0.5 (200A)
Coil
Operation Voltage (V)
12
Resistance (?)
104.4 ~ 127.6 (20°C)

Item
Specification
Note
Heater Relay Switch Resistance (?)
?
Checkable by multi tester
Heater Relay Operation Sound
"Clicking"
Checkable by GDS and SST
Heater Relay Coil Resistance (?)
104.4 ~ 127.6 (20°C)
Checkable by multi tester

High Voltage Battery Heater Repair procedures
Inspection     When removing the battery pack assembly to inspect the battery system, it can be connected to vehicle by using the SST 0K918-E4100, 0K375-E4100, 0K375-E4 ...

High Voltage Battery Heater Relay Components and Components Location
Component 1. Battery Heater2. Battery Heater Relay3. Battery Heater Fuse4. Battery Heater Temperature Sensor ...

Other information:

Kia Soul EV (PS EV) 2015-2020 Service Manual: Inlet Temperature Sensor Repair procedures


Inspection 1. Turn the ignitionswitch OFF. 2. Shut off the high voltage. (Refer to Battery Control System - "High Voltage Shut-off Procedure") 3. Remove the high voltage battery System assembly. (Refer to High Voltage Battery System - Repair procedures - "Removal") 4. Remove the h ...

Kia Soul EV (PS EV) 2015-2020 Service Manual: Front Driveshaft Components and Components Location


Component (1) 1. Driveshaft (RH) 2. Circlip3. Driveshaft (LH) Component (2) [LH] 1. BJ assembly 2. BJ circlip 3. BJ boot band 4. BJ boot 5. Shaft6. TJ boot band7. TJ boot8. Spider assembly9. Snap ring10. TJ housing11. TJ circlip [RH] 1. BJ assembly 2. BJ circlip 3. BJ boot band ...

Copyright © www.ksoulev.com 2020-2022