Other information:
Adjustment
1.
After loosening the tail gate hinge (A) mounting bolt, adjust the tail gate by moving it up and down, or right and left.
2.
Adjust the tail gate height by turning the tail gate overslam bumpers (B).
3.
After loosening the tail gate striker (C) mounting bolts,
adjust the t ...
Removal
1.
Remove the rear wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Remove the rear wheel speed sensor.
(Refer to Driveshaft and axle - "Rear Hub - Carrier")
3.
Install in the reverse order of removal. ...